Table of Contents
Advertisement
Installing Your Camera
The diagrams included in this user guide are for your reference only. See the actual product to mount your camera.
RJ45 Waterproof Connector Installation Guide
The RJ45 connector is IP67 water-proof rated. Please
follow the illustration bellow to install the connector.
1. Network Port POE ready (Built with Water
Proof Coupler)
2. Crystal Head
3. Network Cable
4. Silicone Ring
5. Paw
6. Silica Gel Pad
7. Cap
1. Insert the "3" Network cable through the
waterproof head kit ("4/5/6/7").
2. Insert the Crystal head.
3. Insert the crystal into the network port.
4. Tighten the head kits ("4/5/6/7").
NOTE:
Please install the connector properly as the following picture:
NOTE:
The connector that has been installed properly should be like the picture below:
10
Advertisement
Table of Contents
