Table of Contents
Advertisement
WHITE BALANCE Menu
The WHITE BALANCE menu is used to select the white balance mode.
MODE (white balance mode)
Select the white balance mode from the following:
AUTO: This mode computes the white balance value output using color
information from the entire screen. It outputs the proper value using the color
temperature radiating from a black subject based on a range of values from
2500K to 7500K. This mode is the initial setting.
INDOOR: 3200K Base Mode
OUTDOOR: 5800K Base Mode
OPW (One Push White Balance): The One Push White Balance mode is a
fixed white balance mode that may be automatically readjusted only at the
request of the user (One Push Trigger), assuming that a white subject, in correct lighting conditions, and occupying
more than 1/2 of the image, is submitted to the camera. One Push White Balance data is lost when the power is turned
off. If the power is turned off, reset One Push White Balance.
NOTE: When you select the OPW (One Push White Balance)
Perform the following operations:
1. Place an image of white subject (For example: A piece of white paper) in the center of the screen.
2. Press the HOME button of the infrared remote controller.
The one-push white balance adjustment is activated.
ATW (Auto Tracing White Balance): Auto Tracing White balance (2000K to 10000K)
USER: This is a mode that enables you to manually set the control of R and B gain up to 256 steps.
NOTE: When you select USER, R. GAIN (red gain) and B. GAIN (blue gain) appear. You can select each item in
the range from 0 to 255.
OUTDOOR AUTO: This is an auto white balance mode specifically for outdoors. It allows you to capture images
with natural white balance in the morning and evening.
SODIUM VAPOR LAMP (AUTO/OUTDOOR AUTO): This is an auto white balance mode specifically for
outdoors, which is compatible with sodium vapor lamps.
• SL AUTO: Sodium Vapor Lamp Auto: This is an auto white balance mode that is compatible with sodium vapor
lamps.
• SL: Sodium Vapor Lamp: This is a fixed white balance mode specifically for sodium vapor lamps.
• SLO AUTO: Sodium Vapor Lamp Outdoor Auto: This is an auto white balance mode specifically for outdoors,
which is compatible with sodium vapor lamps.
MODE (white balance mode)
Select the white balance mode from the following:
AUTO: This mode computes the white balance value output using color information from the entire screen. It outputs
the proper value using the color temperature radiating from a black subject based on a range of values from 2500K to
7500K. This mode is the initial setting.
INDOOR: 3200K Base Mode
OUTDOOR: 5800K Base Mode
OPW (One Push White Balance): The One Push White Balance mode is a fixed white balance mode that may be
automatically readjusted only at the request of the user (One Push Trigger), assuming that a white subject, in correct
lighting conditions, and occupying more than 1/2 of the image, is submitted to the camera. One Push White Balance
data is lost when the power is turned off. If the power is turned off, reset One Push White Balance.
NOTE: When you select the OPW (One Push White Balance)
Perform the following operations:
3. Place an image of white subject (For example: A piece of white paper) in the center of the screen.
4. Press the HOME button of the infrared remote controller.
The one-push white balance adjustment is activated.
ATW (Auto Tracing White Balance): Auto Tracing White balance (2000K to 10000K)
USER: This is a mode that enables you to manually set the control of R and B gain up to 256 steps.
30
>EXPOSURE
>WHITE BALANCE
>PICTURE
>LENS PARAMETERS
>SYSTEM SETUP
>FUNCTION SETTING
>SAVE AND EXIT
>EXIT
>MODE: AUTO
>USER DEFINED R: 203
>USER DEFINED B: 213
>EXIT
Advertisement
Table of Contents
