Table of Contents
Advertisement
6.
If you want the camera address to be automatically assigned by the VISCA controller, keep the camera address as the default
address (set the camera address to 0 using the DIP switches).
7.
Reboot the camera by turning it Off/On after the camera address has been set up correctly.
8.
Camera RS422 control supports Daisy Chain connection up to 7 cameras.
NOTE: The connection of SONY keyboard is different than other VISCA (Non-Sony) keyboard. The Chart below shows how to
make RS422 (1 to 1) connection, as well as an RS422 Daisy Chain (multiple camera connection) using a SONY controller:
SONY Keyboard RS422 Connection
10. How to make RS422 connection (1 to 1) and RS422 Daisy Chain (multiple camera connection) using a Non-Sony controller:
RS422 VISCA connection with RS422 serial port controller
1.
1 to 1 RS422 connection. For how to make the connection on the controller, please refer to the controller user guide.
2.
RS422 Daisy Chain multiple camera connection. For how to make the connection on the controller, please refer to the controller
user guide.
Advertisement
Table of Contents
