Bolin Technology FEX Series User Manual page 35

SYSTEM INFO:
CAMERA ID: Modify in the menu of "INTERFACE SET"
BAUD RATE: Modify in the menu of "INTERFACE SET"
SDI VIDEO: Modify in the menu of "INTERFACE SET"
IP VIDEO: Modify in the menu of "INTERFACE SET"
VERSION: The software version running on the camera
SYSTEM RESET:
Soft reboot to save the changes have been made and make the changes activated
EXIT: Push the joystick to the right to exit this level menu.
FUNCTION SETTING Menu
The FUNCTION SETTING menu is used to set the items related to the camera functionalities.
Note: The number of available presets may be limited by the head-ins, controllers, and DVRs that are connected to your
dome system.
PRESETS SETUP:
Preset is to store the PTZ information (such as: Pan and Tilt positions, focal
length etc.) under the specific condition, and call the camera PTZ quickly to shoot
to the specified location that you want the camera to move to.
Note: Presets not only save desired image positions, various picture settings such
as brightness, exposure values and other variables are also saved and stored.
Note: Pan and Tilt are not available on the FEX model.
The menu is used to manage the presets. Total of 220 presets can be managed.
PRESETS NUMBER:
The current preset number that you are managing.
SET NEW PRESET:
To set up (or overwrite) the preset of the preset shown under PRESET
NUMBER
1. Enter this setting menu, you will see "call preset 1 to end" flashing on
the screen.
2. Adjust the camera to the position that you want the preset to be
3. Call the preset 1 using the keyboard to save the preset as the current
position
DELETE PRESET:
With this option selected, push the joystick to the right to delete the preset
shown under PRESET NUMBER preset.
EXIT: Push the joystick to the right to exit this level menu.
CAMERA ID ：01
BAUD RATE ：9600
SDI VIDEO：1080P/30
IP VIDEO ：1080P
SV: S0A0700S010801A15
>EXPOSURE
>WHITE BALANCE
>PICTURE
>LENS PARAMETERS
>SYSTEM SETUP
>FUNCTION SETTING
>EXIT
PRESETS SETUP
TOUR SETUP
PATTERN SETUP
SCAN SETUP
IDLE TIMER ：003
IDLE ACTION ：OFF
EXIT
>PRESET NUMBER: 001
>PRESET MEMORY: ON
>SET NEW PRESET
>DELETE PRESET
>EXIT
CALL PRESET 1 TO END
>PRESET NUMBER: 001
>PRESET MEMORY: ON
>SET NEW PRESET
>DELETE PRESET
>EXIT
35