Exposure Menu - Bolin Technology FEX Series User Manual

Fixed fhd sdi + ip zoom camera
Hide thumbs Also See for FEX Series:
Table of Contents

Advertisement

EXPOSURE Menu

The EXPOSURE menu is used to set the items related to exposure.
AE MODE (Exposure Mode)
FULL AUTO: The exposure is adjusted automatically using the sensitivity of the
image sensor, electronic shutter speed, and iris.
BRIGHT: Adjust the brightness level (LEVEL) manually.
SHUTTER: Shutter mode. The exposure is adjusted automatically using the sensitivity and iris. Adjust the electronic shutter
speed (SPEED) manually.
IRIS PRI: Iris Priority mode. The exposure is adjusted automatically using the sensitivity and electronic shutter speed.
Adjust the iris (IRIS) manually.
MANUAL: Adjust the sensitivity (GAIN), electronic shutter speed (SPEED) and iris (IRIS) manually.
When you select one from various exposure modes, some of the following setting items that are required for the selected
mode appear.
GAIN: Select the gain from the following: -3, 0, 3, 9, 15, 18 dB
SPEED: Select the electronic shutter speed from the following: 1/1, 1/2,
1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425,
1/600, 1/1000, 1/1250, 1/1750, 1/2500, 1/3500, 1/6000, 1/10000 sec.
IRIS: Select the iris the following: CLOSE, F14, F11, F9.6, F8.0, F6.8,
F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.6
LEVEL: Select the brightness level from 0 to 23.
BACKLIGHT MODE:
When the background of the subject is too bright, or when the subject is too dark
due to shooting in the AE mode, back light compensation will make the subject
appear clearer.
This can be set to ON, OFF.
WIDE-D (Wide Dynamic Range):
The camera distinguishes light and dark areas within the same scene and adjusts
the brightness for dark areas, and also controls the blown out highlights. This
helps to balance dark areas and light areas to make both appear more visible
This can be set to ON, OFF.
DEFOG:
Defog: ON, OFF. If the shooting scene has fog, you can open the defog function
to improve the camera's ability to capture an image that penetrates the fog.
This can be set to ON, OFF.
AUTO SLOW SHUTTER:
Auto slow shutter: When AUTO SLOW SHUTTER is set to ON, it can auto adjust the electronic shutter speed.
This can be set to ON, OFF.
EX-COMP (Exposure Compensation):
When MODE is set to one of FULL AUTO, SHUTTER PRI or IRIS PRI, set this
item to ON to enable exposure compensation. When you set EX-COMP to ON,
LEVEL appears, and you can select the exposure compensation level from the
following:
-10.5, -9, -7.5, -6, -4.5, -3, -1.5, 0, +1.5, +3, +4.5, +6, +7.5, +9, +10.5
If you set the level to 0, exposure compensation will be disabled. Level +10.5 is
the brightest and –10.5 is the darkest compensation value.
When EX-COMP is set to OFF, exposure compensation does not function.
EXIT: Push the joystick to the right to exit this level menu.
>EXPOSURE
>WHITE BALANCE
>PICTURE
>LENS PARAMETERS
>SYSTEM SETUP
>FUNCTION SETTING
>SAVE AND EXIT
>EXIT
>AE MODE: FULL ATUO
>IRIS: --
>GAIN: --
>SHUTTER: 1/10k
>BRIGHT: --
>WIDE-D: OFF
>DEFOG: OFF
>AUTO SLOW SHUTTER: OFF
>EX-COMP MODE: ON
>EX-COMP LEVEL: 0DB
>EXIT
>AE MODE: FULL ATUO
>IRIS: --
>GAIN: --
>SHUTTER: 1/10k
>BRIGHT: --
>WIDE-D: OFF
>DEFOG: OFF
>AUTO SLOW SHUTTER: OFF
>EX-COMP MODE: ON
>EX-COMP LEVEL: 0DB
>EXIT
>AE MODE: FULL ATUO
>IRIS: --
>GAIN: --
>SHUTTER: 1/10k
>BRIGHT: --
>WIDE-D: OFF
>DEFOG: OFF
>AUTO SLOW SHUTTER: OFF
>EX-COMP MODE: ON
>EX-COMP LEVEL: 0DB
>EXIT
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fex30shd-b-rsnp2Fex30shd-s-rsnp2

Table of Contents