Lexmark MB2338 Service Manual page 95

Sensor (fuser exit) jam at trailing edge service check
Action
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
Does the problem remain?
Step 2
a
Remove all obstructions along the rear door paper path.
b
Check the rear door and its components for damage.
Are the rear door and its components free of damage?
Step 3
Replace the rear door and cover or rear access door. See
door and cover removal" on page
Does the problem remain?
Step 4
Check the redrive assembly and its components for wear and
damage.
Are the redrive assembly and its components free of wear and
damage?
Step 5
Replace the redrive assembly. See
on page 274.
Does the problem remain?
Sensor (fuser exit) static jam service check
Action
Step 1
Make sure that the paper is loaded properly. Use the
recommended paper. See
Does the problem remain?
Step 2
a
Reseat the fuser cables from the controller board.
b
Reseat the fuser cable from the LVPS.
c
Reseat the fuser cable from the extension cable.
Does the problem remain?
"Avoiding jams" on page
273.
"Redrive assembly removal"
"Avoiding jams" on page
Diagnostics and troubleshooting
95
Yes
Go to step 2.
71.
Go to step 4.
Go to step 4.
"Rear
Contact the next
level of support.
Contact the next
level of support.
Yes
Go to step 2.
71.
Go to step 3.
7017-2xx, -4xx, -6xx
No
The problem is
solved.
Go to step 3.
The problem is
solved.
Go to step 5.
The problem is
solved.
No
The problem is
solved.
The problem is
solved.