Print Is Too Light Check - Lexmark MB2338 Service Manual

Actions
Step 12
Replace the power supply. See
page 260.
Does the problem remain?

Print is too light check

Note: Before performing this print quality check, go to the control panel home screen and navigate to
Settings > Troubleshooting > Print Quality Test Pages, and then perform the Initial print quality check.
See "Initial print quality check" on page
Actions
Step 1
Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the printer is using a third‑party cartridge, then refer the
users to their cartridge supplier.
Is the printer using a genuine and supported toner cartridge?
Step 2
Install a genuine and supported toner cartridge.
Does the problem remain?
Step 3
a
Turn off the printer, wait for 10 seconds, and then turn on the
printer.
b
From the control panel:
1
Increase the toner darkness in the Quality menu.
Note: 8 is the factory default setting.
2
Set the paper type, texture, and weight in the Paper menu
to match the paper loaded.
Does the problem remain?
"Power supply removal" on
31.
Diagnostics and troubleshooting
42
7017-2xx, -4xx, -6xx
Yes No
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.