Table of Contents
Advertisement
Menu item
Tray Configuration
A5 Loading
Short Edge*
Long Edge
Tray Configuration
Paper Prompts
Auto*
Multipurpose Feeder
Manual Paper
Envelope Prompts
Auto*
Multipurpose Feeder
Manual Envelope
Tray Configuration
Action for Prompts
Prompt user*
Continue
Use current
Reports
Menu Settings Page
Event Log
Event Log Summary
Supply Usage And Counters
Clear Supply Usage History
Reset Black Cartridge Counter
Reset Black Imaging Unit Counter
Reset Maintenance Counter
Printer Emulations
PPDS Emulation
Off*
On
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Print Configuration
Font Sharpening
0–150(24*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the page orientation when loading A5‑size paper.
Set the paper source that the user fills when a prompt to load
paper or envelope appears.
Note: For Multipurpose Feeder to appear, set Configure MP
to Cassette from the Paper menu.
Set the printer to resolve paper- or envelope-related change
prompts.
Print reports about printer menu settings, status, and event
logs.
Reset the supply page counter or view the total printed pages.
Set the printer to recognize and use the PPDS data stream.
Set the fax chip to enter low‑power mode whenever the printer
determines that it should.
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Service menus
181
7017-2xx, -4xx, -6xx
Advertisement
Table of Contents
