133 Errors - Lexmark MB2338 Service Manual

Action
Step 9
Clean or replace the imaging unit.
Does the problem remain?

133 errors

133 error messages
Error code Description
133.04 CTLS timeout was detected at the imaging unit.
133.05 CTLS reading at the imaging unit is above the
maximum expected value.
133.06 CTLS reading at the imaging unit is below the
minimum expected value.
133.08 Excessive CTLS noise was detected at the
imaging unit.
Imaging unit CTLS error service check
Action
Step 1
a
Check the imaging unit CTLS contacts for contamination.
b
Check if the contacts are bent or damaged.
Are the contacts free of contamination and damage?
Step 2
Clean or repair the smart chip contact.
Does the problem remain?
Step 3
a
Remove the right cover. See
page 223.
b
Reseat the CTLS contact cable on the controller board.
Does the problem remain?
Step 4
Check the imaging unit for problems. See
unresponsive imaging unit service check" on page
Does the problem remain?
"Right cover removal" on
"Unsupported or
124.
Diagnostics and troubleshooting
138
Yes
Contact the next
level of support.
Action
See "Imaging unit CTLS error service check"
on page 138.
Yes
Go to step 3.
Go to step 3.
Go to step 4.
Contact the next
level of support.
7017-2xx, -4xx, -6xx
No
The problem is
solved.
No
Go to step 2.
The problem is
solved.
The problem is
solved.
The problem is
solved.