ABB FSCA-01 User Manual page 77

Register Address
(4)00057
(4)00058
(4)00059
(4)00060
(4)00061
(4)00062
(4)00063
(4)00064
(4)00065
(4)00101...(4)09999
(4)20000...(4)29999
1)
6-digit register addressing ([4]00001) is used instead of 5-digit register
addressing ([4]0001) to describe register map. See section
addressing on page
2)
Register addresses of the 32-bit parameters cannot be accessed by
using 5-digit register numbers.
1), 2)
DATA IN 4
DATA IN 5
DATA IN 6
DATA IN 7
DATA IN 8
DATA IN 9
DATA IN 10
DATA IN 11
DATA IN 12
Drive Parameter Access (16-bit)
Register Address = (4)00000 + 100 × Group +
Index
Example for Drive Parameter 3.18:
(4)00000 + 100 × 3 + 18 = (4)00318
Note: Addressing depends on the address
mode selected with parameter 12 in group A
(51/151, 54/154).
Drive Parameter Access (32-bit)
(not supported with ACS355)
Register Address = (4)20000 + 200 × Group +
2 × Index
Example for Drive Parameter 1.27:
(4)20000 + 200 × 1 + 2 × 27 = (4)20254
Note: Addressing depends on the address
mode selected with parameter 12 in group A
(51/151, 54/154).
70 for additional information.
Communication protocol 77
Register Data (16-bit)
Register