Hardware Torque - Taylor-Dunn SC-100-24 Service And Replacement Parts Manual

SC-100
C
Note: Values shown are for reference only
MA-100-03

HARDWARE TORQUE

If hardware is not listed here, refer to standard torque
values in the appendix.
Description
Pinion nut
Drain plug
Gear case to 3rd member
3rd Member cover bolts
Axle hub bolt
Note: Special Washers
The washers for the primary gear case
housing and carrier housing side plate
are in the shape of a cone referred to
as conical or belleville washers.
This type of washer is designed to
maintain tension in bolted assemblies.
Belleville washers must be orientated
correctly to function properly. See illustration.
D
Transaxle-GT
Foot Pounds Newton Meters
154-169 209229
21-25 28.4-33
18-20 24.4-27
40-50 54-67.5
275 392
Page 39