Taylor-Dunn SC-100-24 Service And Replacement Parts Manual page 25

SC-100
# Description
1 Steering Shaft Pillow Blocks
2 Front Fork Spindle Bearings
3 Steering Shaft Gears
4 Throttle Module Push Rod
5 Front Wheel Bearings
6 Steering Chains
7 Transaxle Drain Plug
8 Transaxle Level Plug
9 Transaxle Fill Plug - GT
9 Transaxle Fill Plug - SD
9 Transaxle Fill Plug - SC-90
10 Primary Reduction Fill/Level - SD
11 Motor Coupler
HAZARDOUS WASTE DISPOSAL
This vehicle contains various components and/or fluids that may be classified as hazardous waste.
This includes but is not limited to Lead, Acid, Oil, Grease.
The brake linings originally installed by the factory do not contain asbestos. However, since it is possible that
asbestos brake linings were installed as replacement parts, brake linings shall be handled as hazardous waste.
The requirements for disposal of hazardous waste vary by location. Consult your local regulations regarding
the proper disposal of hazardous waste products.
MA-100-03
Locations
2
General Purpose Grease
(not shown)
1 General Purpose Grease
1 General Purpose Grease
1 General Purpose Grease
1 or 2 High Temperature Wheel Bearing Grease
2 30 wt Motor Oil
1 -
1 -
1 1.2 Liters SAE 80w90 Gear Oil
1 1.4 Liters SAE 80w90 Gear Oil
11 ounces 30wt motor oil
1
1 0.75 Liters SAE 80w90 Gear Oil
P
1
art # 94-421-34 Moly Paste Grease
Lubrication
Lubricant Type
Page 25