Motor - Taylor-Dunn SC-100-24 Service And Replacement Parts Manual

Replacement Parts

MOTOR

#
Description
1 Front Housing
2 Armature
3 Field Assembly
4 Brush Spring
5 Brush Holder
6 Brush
7 Bearing Retainer
8 Bearing
9 Rear Housing
10 Brush Cover
11 Dust Cap
Note 1 The original motor provided under part number 70-054-40 has been discontinued. It has been replaced by 70-054-41. The
70-054-41 motor has slightly more power & torque.
The 70-054-40 motor can be directly replaced with the 70-054-41 motor. The 70-054-41 motor will perform with the original
parameters in the Sevcon® controller; however the vehicle will have about a 15% reduction in top speed. To take full
advantage of the increased performance of the 70-054-41 motor, new parameters must be programmed into the Sevcon®
controller.
Please contact Taylor-Dunn® Manufacturing for details on returning the controller for re-programming.
Spec # Cross reference
Motor Spec # Part Number
DVI-4002 70-054-40
XP-1789 70-054-41
DY2-4001 70-054-41
DVI-4003 70-057-40
XP-1786 70-052-40
DD3-4004 70-052-40
203-21-4001 70-072-41
XP1820A 70-072-41
DY8-4002 70-054-42
Page 120
Taylor-Dunn Motor Part Number
70-054-40 70-054-41
1
70-421-10 70-421-10
70-400-00 70-400-00
70-209-30 *
70-412-20 70-412-20
70-170-00 70-170-00
70-109-00 (2) 70-109-00 (2)
70-417-00 70-417-00
80-212-00 80-212-00
70-421-20 70-421-20
70-421-00 70-421-00
95-930-00 95-930-00
* - Not available at time of printing
70-057-40 70-052-40
70-421-10 *
70-400-10 *
70-209-40 *
85-403-00 70-412-20
70-173-00 70-170-00
70-170-10 (8) 70-109-00 (2)
70-417-00 70-417-00
80-212-00 80-212-00
70-421-30 70-421-20
70-421-00 70-421-00
95-930-00 95-930-00
SC-100
70-072-41 70-054-42
* 70-421-10
* 70-412-30
* *
85-403-00 70-412-20
70-173-00 70-170-00
* 70-109-00
* 70-417-00
* 80-212-00
* *
* 70-421-00
- -
MA-100-03