Position The Receptor; Vertical Adjustment - GE Optima XR646 Operator's Manual

Position the Receptor

The wallstand receptor placement may be adjusted vertically or tilted.

Vertical Adjustment

The receptor arm assembly can be moved vertically

Using the Vertical Adjust and receptor Tilt Handle.

Using the foot control.

Using the positioning remote. Refer to
more information.
Figure 8-20 Receptor and arm vertical movement
CAUTION Patients should be clear of the wallstand when vertical movement is in process.
CAUTION Be careful of the hand grips that stick out below the wallstand when positioning
wheelchair patients under the wallstand.
5495975-1EN Rev.9
© 2013-2017 General Electric Company. All rights reserved.
(Figure 8-20) in one of three ways:
Standard Table Hand Grips and Compression Band(p.
Chapter 8: System Hardware Overview
8-72)for
8-35