Table of Contents
Advertisement
Chapter 13: Advanced Applications
Figure 13-30 Re-paste button
The Re-pasting screen shows two sets of images. The left half shows the selected pasting region (the
overlapped area between 2 sub-images). The left half is also the work area where you set the alignment.
The right half shows a preview of the pasted image.
Figure 13-31 Re-pasting screen
Follow this process to manually re-paste images.
1. On the Image Tools panel, click the Image Processing tab.
2. Click the [REPASTE] button.
Note: It may take a few moments for images to appear.
3. Select a region to re-paste from the drop-down list
(Figure
13-32). For example: 1/2, 2/2.
[RESET REGION] removes any manual re-pasting from the selected region.
5495975-1EN Rev.9
13-28
© 2013-2017 General Electric Company. All rights reserved.
Advertisement
Table of Contents
