Multiple Wireless Detector Pop-Up Window - GE Optima XR646 Operator's Manual

Table 8-7 OTS control screen functions
Item
[EXPOSURE HOLD]
System Status Messages

Multiple Wireless Detector Pop-up Window

Wireless Detector Window allows the user to select a primary wireless detector on the overhead tube
system.
Once the intended detector is selected, click the Make Active button. This will designate the selected
detector as primary.
Figure 8-9 Multiple Wireless Detector Pop-up Window
Horizontal
5495975-1EN Rev.9
© 2013-2017 General Electric Company. All rights reserved.
Appears when there is some condition that prevents an x-ray from
being taken, such as the exam room door being open or the tube is
not in alignment with the receptor.
Press the button to view a list of all errors and interlocks that are
preventing the exposure. The items are removed from the list as
they are corrected. The button disappears when all errors and
interlocks are corrected.
Displays the last system status message.
Chapter 8: System Hardware Overview
Description
Vertical
8-20