Conduct An Emergency Exam - GE Optima XR646 Operator's Manual

Conduct an Emergency Exam

Emergency Exam is a function that allows a patient to be x-rayed without selecting the patient from the
Worklist or adding the patient to the Worklist.
Figure 10-17 Emergency Exam button
Emergency Exam is used in the following situations:

Medical emergency – The patient needs an x-ray taken immediately.

No patient information available – There is no patient information to enter due to the patient's medi-
cal condition. For example, the patient was found unconscious with no identification.
When the [EMERGENCY EXAM] button is clicked, the system assigns a unique tracking number as the
Patient Name. The tracking number is the word "NEW" followed by a date and time stamp of the second
the Emergency Exam button was clicked. For example: NEW070422140345. In this example, the number
sequence means that the exam was initiated in year 07, month 04, day 22, hour 14, minute 03, and sec-
ond 45.
The tracking number is used as the Patient Name on image annotation and as the Patient ID.
Note: When the patient information becomes available, images can be copied into the appropriate
Worklist selection. The selection can be populated to the Worklist either by HIS/RIS or manual
entry. Refer to
mation.
Once initiated, an emergency exam is conducted the same way as any other exam.
Follow this process to conduct an emergency exam.
1. Click [EMERGENCY EXAM] from the bottom left of the Worklist.
 The Select Protocols screen appears. Refer to
mation.
2. Select the protocols for the exam.
3. Click [ACCEPT].
 The Acquisition screen appears.
4. Select the protocol to perform from the Protocol List.
5. Acquire images. Refer to
Conduct a Table Top Exam (p. 10-19)
5495975-1EN Rev.9
© 2013-2017 General Electric Company. All rights reserved.
Chapter 12: Image Management-Open Exams and Images (p. 12-7)
Conduct a Table Exam (p.
for more information.
Select or Change Protocols (p. 10-12)
10-15), Conduct a Wallstand Exam (p.
Chapter 10: Image Acquisition
for more infor-
for more infor-
10-17), or
10-23