Table of Contents
Advertisement
Emergency Prompt - The text that will be displayed to any user logging in as emergency. The user is
asked to enter information (usually their actual user name). This text is the text that will appear in that
prompt for information.
7. Press [Apply Configuration].
To make a configuration change, make the necessary changes on the fields, and press the Apply
Configuration button. If there was a problem with making the changes (such as an invalid value or a
problem contacting the back-end Servlet) you will see a message box indicating this error with a
description of the error. If the changes are successful, after the 'Apply Configuration' button is
pressed, then you will see a brief message indicating that the changes were applied in a green label.
If at any time, you want to revert your changes to what is currently saved on the back-end, you can
press the Restore Configuration button. This will undo any changes that you have made that have
not yet been saved by pressing the Apply Configuration Button. (Once you press the 'Apply Configura-
tion' button and get the confirmation label, the changes have been applied).
Configure Local Users
The second tab on the EA3 Administration Component is the Local Users tab. On this tab, you can add
users, remove users, change user group memberships, change user names, change user passwords, lock
/ unlock users, force users to change their password on next login, etc. Below is a screen-shot of the EA3
Administration Component Local Users Tab:
1. Select the Local Users tab.
Figure A-3 Local Users Tab
2. Select the choices you wish to have selected.
5495975-1EN Rev.9
© 2013-2017 General Electric Company. All rights reserved.
Appendix A: Login Administration
A-4
Advertisement
Table of Contents
