Table of Contents
Advertisement
Network Connections
Network and printer connections are configured through the Utilities System-System screen. This screen
allows qualified service personnel to define the Digital Imaging and COmmunication in Medicine (DICOM)
send destinations.
Network connections may be added, removed, or edited from this screen.
Follow this process to access the Network Connections screen.
1. On the Worklist screen, click [UTILITIES].
The System-System screen appears.
2. Click [NETWORK CONNECTIONS].
The Network Connections screen
Figure 15-4 Network Connections screen
Add or Edit Network Host
Adding and editing network hosts use very similar process and the same screens as shown in
and
Figure
15-6.
Table 15-1
1. Click the appropriate button to add or edit hosts:
If editing an existing connection, select the network host and click [EDIT].
If adding a new connection, click [ADD].
2. Complete requested information for both tabs (see
the network host or save the changes.
5495975-1EN Rev.9
© 2013-2017 General Electric Company. All rights reserved.
(Figure
15-4) appears.
and
Table 15-2
describe the fields in detail.
Table 15-1
and
Table
15-2) and click [SAVE] to add
Chapter 15: Preferences
Figure 15-5
15-4
Advertisement
Table of Contents
