Table of Contents
Advertisement
8. 八字扣標準尺⑤的調整
⑴ 當八字扣固定器⑥往縫紉機旁側移動時，
八字扣固定器⑥的先端與八字扣標準尺⑤
之間的縫隙為 0.3mm。
【調整】以轉鬆螺絲⑦來調整。
9. 反摺導帶的調整
⑴ 當肩帶①進入於縫紉機壓板②的下方時，
讓前擋板③與後擋板④的各自先端碰到肩
帶①的側面。
【調整】將前擋板③的螺絲⑤轉鬆，移動
量桿⑥進行調整。轉鬆螺絲⑦調整後擋板
④。
②
8.Adjustment of 8-shaped buckle standard
⑦
0.3mm
⑤
9. Adjustment of counter-folded strap guide
④
②
⑥
①
③
Introduction
ruler⑤
(1)While 8-shaped buckle holder⑥ move
to the sewing machine side, the gap
between 8-shaped buckle holder⑥ front
end and 8-shaped buckle standard
ruler⑤ are 0.3mm.
【Adjustment】Loosen screw⑦ for
adjustment.
⑥
(1)When strap① get under sewing machine
presser bar②, let each front end of
the front strap holder③ and rear strap
holder④ touch the side of strap①.
【Adjustment】Loosen t he screw⑤ of the
front strap holder③, move the shaft of
the front strap holder⑥ for adjustment.
Loosen screw⑦ to adjust rear strap
holder④.
⑤
P22
Advertisement
Table of Contents
