Strap Install Method - Siruba ASP-BST100 Instruction Book And Parts List

肩帶裝置方向
⑴通過送帶導柱①。
⑵通過肩帶結束開關②的中間。
⑶提起肩帶接縫開關③柄桿通過。
⑷通過送帶導柱④。
⑸提起送帶滾輪⑤的柄桿通過。
⑹從導帶線⑥的圈中通過。
⑺通過帶墜⑦。
⑻通過送帶導柱⑧。
⑼按夾帶開關⑨，將帶子放入夾帶盒⑩的槽
部，從夾帶盒 露出約 3~5mm。
②
⑤
⑥
⑦
①
⑧
③
④

STRAP INSTALL METHOD

⑴ Through tape feeding guide part①.
⑵ Through the middle of strap sensor②.
⑶ Lift the shaft of seam strap sensor③ and
make through.
⑷ Through tape feeding guide part④.
⑸ Lift shaft of tape feeding roller⑤ to make
through.
⑹ Through the antistatic coil⑥.
⑺ Through the counterweight⑦.
⑻ Through tape feeding guide part⑧.
⑼ Press strap-fixed switch⑨, put the strap
in the notch⑩ of strap-fixed device
and reveal 3~5mm from the strap-fixed
device .
⑨
⑩
Introduction
3~5mm
P4