安裝與調整
(1) 馬达的安装 : 請参閱各車头製造厂之說明书。
Motor installation: Please refer to the machine head ' s instruction.
(2) 控制箱的安装 :
Control Box Installation:
a).桌板右侧面須預留 100 mm以上空間
Leave 100 mmspace at right
(3) 控速器的安装 :
Speed Control Unit Installation:
a).控速器与其支架座
Speed Control Unit
控速器支架 Support stand
鎖装螺丝釘
Screws
鎖装螺丝釘时,需以螺丝起子全程鎖装。
Always use screwdriver to tightly secure screws
(4).控速器前/後踏力量的調整 :
Adjust the speed control unit:
控速器各部位名称 : 如右图示
Components of the speed control unit: see figure
A : 前踏力量弹簧 / Spring for toeing forward force adjustment
B : 後踏力量的調整螺栓 / Boltfor heeling backward force adjustment
C : 踏板旋臂 / Treadle / Pedal arm
D : 脚踏板吊桿 / Pitman Rod for Treadle / Pedal
2
b).将控制箱鎖装於桌板下方
Mounting under the working table
尺寸图 Measurement
367mm
100 mm
130mm
b).保持在吊桿成直線下,将控速器连座鎖於桌板下方
Keep rod in vertical, secure the unit under the table
桌
INSTALLATION AND ADJUSTMENT
c).安装後示意图
Installation layout
235mm
301mm
板
輕 decrease
輕 decrease
c).安装後示意图
Installation layout
重 increase
B
C
D
A
重 increase