Buckle Feeding Bed And Upper End - Siruba ASP-BST100 Instruction Book And Parts List

3. 扣環供給底板及扣環供給端頭
⑴供給底板⑤的先端與八字扣固定器②之間
的縫隙為 0.5mm。
【調整】將螺絲⑥轉鬆，以調整螺絲⑦來
調整。
⑵從扣環供給端頭⑧到扣環供給底板⑤的先
端距離為 0.2mm。
【調整】將螺絲⑨轉鬆調整。
⑧
②
⑦
⑥

3.Buckle feeding bed and upper end

⑴The gap between the front end of feeding
bed⑤ and 8-shaped buckle holder② are
0.5mm.
【Adjustment】Loosen screw⑥ in order
to use screw ⑦to adjust.
⑵The distance between the buckle feeding
front end⑧ with buckle feeding bed front
end ⑤ are 0.2mm.
【Adjustment】Loosen screw⑨ to adjust.
⑤
⑨
Introduction
P14