Siruba ASP-BST100 Instruction Book And Parts List page 40

現象 Phenomenon
4. 肩帶接縫檢測不良
(1) 到了肩帶接縫口不停
(2) 肩帶從肩帶接縫開關滾輪
上脫落
4. Strap seam detect
defective.
(1)Wouldn t stop even till
'
the strap seam end.
(2)Strap fall off from strap
seam sensor roller.
P31
原因 Reasons
•肩帶接縫檢測調整不良
•肩帶輸送引導針的調整不
良
•Strap seam detect adjust
defective.
•Strap feeding guide
needle adjust defective.
對策 Strategies
a. 導帶板往 A 的方向移動
b. 導帶板往 B 的方向移動
【調整】
將螺絲⑧轉鬆後進行
a.Feeding strap plate move toward A
direction.
b.Feeding strap plate move toward B
direction.
【Adjustment】
Proceed after loosen screw ⑧
⑧
A
B
•調整到接縫處，將肩帶接縫開關調至
ON，通過後調至 OFF。
【調整】
將螺絲①轉鬆後進行。
•Adjust to the seam part, turn ON
strap seam sensor, turn OFF after
getting through.
【Adjustment】
Proceed after loosen screw ① .
①
•將肩帶輸送引導針往箭頭方向移動，
使其和肩帶寬度對齊。
【調整】
將螺絲②、③轉鬆後進行。
•Move the strap feeding guide needle
toward arrow direction in order to
align with the strap's width.
【Adjustment】Proceed after loosen
screw ②、③ .
肩帶寬度
Width of strap
肩帶寬度
肩帶接縫
②
肩帶接縫
Strap seam
開關滾輪
開關滾輪
switch roller
③