Siruba ASP-PTA100 Original Instructions Manual page 15

限位銷可限制紙卡左右些許的偏差範圍，當
卡片寬度變更時需調整至紙卡邊界。
螺絲鬆開可調整位置
Loose screw to adjust
the position
限位銷
Limited pin
紙卡邊界
Label boundary
限位銷與紙卡邊界需留間隙約 0.5 ～ 1mm，
如此紙卡才不會被撞歪。
保留間隙
Keep space
Introduction
Limited pin could limit the deviation of the
label. When label width changes, limited pin
needs to adjust to the label boundary.
螺絲鬆開可調整位置
Loose screw to adjust the position
紙卡邊界
Label boundary
Need to keep 0.5~1 mm space for limited pin
and label. Then label will not crash.
限位銷
Limited pin
保留間隙
Keep space
P10