Siruba ASP-PTA100 Original Instructions Manual page 23

4. 吸盤取料失敗
台移載時未將料卡吸住則為取料失敗
調整入料檢知位置可決定載料平台的上升高
度。
4. Failure for suction cup to catch material
When suction cup platform moves to next
step but does not catch material label well,
suction cup fails to catch material.
To adjust filling detection position could
control the raise height of material platform.
Introduction
鬆開螺絲後可
調整檢知位置
After loosing
screws, we
could adjust
detection
position
P18