Falcon Lock Co; Marks Usa - Kaba 5402 Series Technical Manual

Falcon Lock Co.

Division of Ingersoll Rand
• "FALCON" appears on the latch face
.
TOOLS:
• Spanner wrench is required for grade 1.
• / " pin punch for depressing retainer
1
16
Falcon LY series
grade 1
levers
retrofit type KDH
Peaks Global: 5400-xx-1099
• 5400-xx-1095 is identical to 5400-xx-1099, except for the small diameter plug face required for Falcon
dead locks and old style X series unit locks.

Marks USA

Amityville, New York
• "MARKS" appears on the latch face.
• Grade 1 and 2 cylindrical locks can be prepped for small format interchangeable core.
• Current Marks deadbolts accept only 6-pin small format interchangeable core.
Marks 195/295
grade 1
levers
retrofit type KDH
Peaks Global: 5400-xx-1099*
*with original Marks tailpieces
TOOLS:
• Marks spanner wrench (engages entire rose) is required to install lockset, but not to change cylinders.
hole in
edge of rose
Section 5 - 7
X series RU and X series
grade 1 grade 1 unit lock
knobs preassembled
KDH KDH
5400-xx-1099 5400-xx-1099;
180 170/270
grade 1 grade 2
knobs levers
KDH KDH
5400-xx-1099* 5400-xx-1099*
knob
rose
S series D series
grade 2 tubular
knobs deadlocks/latches
KDH
5400-xx-1099 5400-xx-1095
110/120 130 Deadlocks
grade 2
knobs
KDH
5400-xx-1099* 5400-xx-1099*