Kaba 5402 Series Technical Manual page 44

Inserting Peaks Patented Bottom Pins in Small Format Interchangeable Cores
Inserting Peaks Pins
Place the Plug Follower (part number 3400-00-4003) into core (as shown). Position the slot at end of Plug
Follower to align with Peaks Pin hole. Insert spring into pin hole.
Position top pin into plug follower slot. With pin depressed into pin hole, slide follower half way through plug.
Section 3 - 5
Top Pin (Positioned bevel toward spring)
Spring
Peaks Pin
Hole
Plug Follower with spring resting in slot.