Kaba 5402 Series Technical Manual page 19

Key-In-Knob Cylinders - 5400 Series
5400-xx-1099 uncombinated and use:
CORBIN CL3300 grade 1 levers
RUSSWIN
4700-80-2001 SA/3B tailpiece, vertical
3450-80-2003 spacing washer
or, the original Corbin Russwin
tailpiece may be used.
Note: Not for use on G3 exit trim.
CORBIN CL3400, CL3600 grade 1 levers,
5400-xx-1099 uncombinated and use:
RUSSWIN Lever trim A5, N5 for ED8000 exit devices
4700-80-2002 S/3C tailpiece, vertical
3450-80-2003 spacing washer
If spacer supplied by Corbin Russwin is missing,
substitute Kaba 3400-00-2009 security bushing.
CORBIN CL3800 grade 2 levers
5400-xx-1099 uncombinated and use:
RUSSWIN
the original Corbin Russwin tailpiece and
plastic tailpiece bushing.
Corbin Russwin tailpiece and bushing not supplied.
5400-xx-1055 uncombinated
CORBIN CL3900 grade 2 levers
RUSSWIN
5400-xx-1099 uncombinated and use:
FALCON B Series grade 2 levers
1590-80-2000 SD/3A tailpiece, vertical
3450-80-2003 spacing washer
"99" plug & shell
SA/3B
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
S/3C
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
SD/3A
plug requires
J or K series
bottom pins
Section 2 - 8