Kaba 5402 Series Technical Manual page 20

Key-In-Knob Cylinders - 5400 Series
5400-xx-1095 uncombinated and use:
FALCON D Series deadlocks; use Falcon tailpieces
Single cylinder functions:
Falcon TP-10 tailpiece (A28350-000-00)
and retainer TPR-4 (A08385-000-00)
Double cylinder functions:
Falcon TP-9 tailpiece (A24350-007-00)
and retainer TPR-2 (A14351-000-00)
Falcon tailpieces not supplied.
5400-xx-1099 uncombinated and use:
FALCON F Series levers & N Series knobs
1590-80-2000 SD/3A tailpiece, horizontal
3450-80-2003 spacing washer
5400-xx-1099 uncombinated and use additional Kaba parts:
FALCON LY grade 1 levers (same as early model imported PDQ lever)
4700-80-2001 SA/3B tailpiece, vertical
3450-80-2003 spacing washer
two 4700-00-4007 metal washers, tailpiece
5400-xx-1099 uncombinated and use Falcon parts.
FALCON RU Series grade 1 Unit lock
Install Falcon driver and tailpiece.
Most functions use Falcon no. 030730-001-30
RU 381 inside cylinder only use
Falcon no. 030730-003-30
RU571 only use Falcon no. 030730-005-30
Falcon parts are not supplied.
Section 2 - 9
"95" plug & shell
with
small plug face
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
plug requires
SD/3A
J or K series
bottom pins
"99" plug & shell
SA/3B
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
plug requires
J or K series
bottom pins