Kaba 5402 Series Technical Manual page 22

Key-In-Knob Cylinders - 5400 Series
FALCON Older X Series grade 1 knobs and unit locks
5400-xx-1095 uncombinated and use:
with one-piece (capless) knobs and knob hole bushings
3450-80-2003 spacing washer
use existing tailpiece from Falcon cylinder, horizontal.
Note: If Falcon tailpiece needs replacement, Kaba FX
tailpiece (4700-80-2003) can be used, but must be
ordered separately.
5400-xx-1099 uncombinated* and use:
KABA 1411 padlock
1410-82-2000 P tailpiece horizontal
3450-80-2003 spacing washer
*Note: When ordering cylinder uncombinated,
P tailpiece must be requested.
5400-xx-1099 uncombinated and use:
LSDA LH1000 grade 1 knobs
1590-80-2000 SD/3A tailpiece, horizontal
3450-80-2003 spacing washer
LSDA LX1000 grade 1 levers, L100 grade 2 levers,
5400-xx-1099 uncombinated and use:
600 series 'clutch' lever (1998)
1590-80-2000 SD/3A tailpiece, vertical
3450-80-2003 spacing washer
Section 2 - 11
"95" plug & shell
with
small plug face
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
plug requires
SD/3A
J or K series
bottom pins
"99" plug & shell
SD/3A large diameter
plug requires
J or K series
bottom pins