Kaba 5402 Series Technical Manual page 45

Inserting Peaks Patented Bottom Pins in Small Format Interchangeable Cores
Orient Key and plug assembly as shown with patented bottom pin facing upward. Orient the cylinder
assembly as shown with Kaba logo facing down.
Slide key and plug assembly into cylinder assembly – pushing Plug Follower out the back of casing.
Note: Use core to hold cylinder assembly components (cylinder and change key barrel) in place while
inserting key and plug assembly.
Secure plug in cylinder assembly with E-ring as shown. Tab in center of ring should be positioned to fit
notch in base of keyway. Push ring securely into place.
E-ring
Section 3 - 6