Kaba E-Plex 50 Series Operation Manual
  1. Manuals
  2. Brands
  3. Kaba Manuals
  4. Locks
  5. E-Plex 50 Series
  6. Operation manual
Kaba E-Plex 50 Series Operation Manual

Kaba E-Plex 50 Series Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
e-plex
50
/30
series
®
xx
xx
operations manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E-Plex 50 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Kaba E-Plex 50 Series

Summary of Contents for Kaba E-Plex 50 Series

  • Page 1 e-plex series ® operations manual...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS States of the Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Factory Mode 4.
  • Page 3 Publishe 4.r . The 4. information containe 4.d in this publication is accurate 4. to the 4. be 4.st of Kaba Acce 4.ss Control’s knowle 4.dge 4. . Spe 4.cifications are 4. subje 4.ct to change 4. without notice 4. .

  • Page 4: States Of The Lock

    States of the Lock Factory Mode The 4. factory mode 4. is one 4. of thre 4.e 4. primary state 4.s of the 4. E-Ple 4.x Lock . The 4. main characte 4.ristics of this state 4. are 4.: • The 4. E-Ple 4.x Lock ope 4.ns only whe 4.n the 4. 8-digit maste 4.r combination (1-2-3-4-5-6-7-8) is ke 4.ye 4.d in . •...

  • Page 5: Pushbutton Programming Mode 4

    Default values of the E-Plex Lock programmable parameters ® Parameters Factory Default Values Date 4. (MM/DD/YY) 01/01/00 Time 4. (HH:MM) 00:00 Lock state 4. Unprogramme 4.d Lock ID 0000 Passage 4. mode 4. ope 4.n time 4. limit 9 hours Passage 4. mode 4. Disable 4.d Lockout mode 4. Disable 4.d Unlock time 4. 2 se 4.conds Buzze 4.r volume 4.

  • Page 6: Re 4.Se 4.T Proce 4.Dure 4.S

    2 . The 4. ge 4.ne 4.ral proce 4.dure 4. for all programming functions is as follows: a . Put the 4. lock in Programming Mode 4. by pre 4.ssing # Maste 4.r Code 4. # b . Use 4. the 4. Summary of Commands Table 4. in the 4. appe 4.ndix se 4.ction of this guide 4.
  • Page 7 You have 4. up to 5 se 4.conds to push ‘#’ and re 4.le 4.ase 4. the 4. ove 4.rride 4. ke 4.y . If 5-se 4.cond time 4.out is re 4.ache 4.d without pre 4.ssing ‘#’, the 4. lock continue 4.s its normal ope 4.ration . As soon as the 4. ‘#’ is pre 4.sse 4.d, the 4. lock e 4.xits the 4. curre 4.nt state 4.
  • Page 8 Hard reset sequence for E-Plex 3xxx Series: A) User knows the Master code: Inse 4.rt me 4.chanical ove 4.rride 4. ke 4.y, turn to 3 o’clock position, pre 4.ss # and the 4.n turn ke 4.y back to 12 o’clock position within 5 se 4.conds . You have 4. up to 5 se 4.conds to push ‘#’ and the 4.n turn ke 4.y back to 12 o’clock position .

  • Page 9: Proce 4.Dure 4. 1 - Program The 4. Acce 4.Ss Code 4. Le 4.Ngth

    Afte 4.r the 4. 15 minute 4.s de 4.lay has e 4.xhauste 4.d, the 4. Re 4.se 4.t se 4.que 4.nce 4. in progre 4.ss me 4.ssage 4. will be 4. displaye 4.d on the 4. LEDs again for 20 se 4.conds . During this pe 4.riod, the 4. use 4.r must e 4.nte 4.r the 4. 1-2-3-4-5-6-7-8-# se 4.que 4.nce 4. and the 4. lock will re 4.se 4.t . If the 4. use 4.r fails to do so, the 4. se 4.que 4.nce 4. will abort and the 4.

  • Page 10: Proce 4.Dure 4. 2 - Modify The 4. Maste 4.R Use 4.R Acce 4.Ss Code 4

    PROCEDURE 2 - MODIFY THE MASTER USER ACCESS CODE Required User Level: Master 1 . To change 4. the 4. factory code 4. or curre 4.nt Maste 4.r Code 4., follow the 4. ne 4.xt thre 4.e 4. ste 4.ps: 2 . Put lock into Pushbutton Programming Mode 4. . 3 . Use 4. the 4. command, 000, for Maste 4.r, the 4.n the 4. ne 4.w Maste 4.r Code 4. numbe 4.r . 4 .

  • Page 11: Proce 4.Dure 4. 4 - Program The 4. Lock Id And Unlock Time 4

    PROCEDURE 4 - PROGRAM THE LOCk ID AND UNLOCk TIME Assign an ID numbe 4.r to e 4.ach lock for configuration and auditing purpose 4.s . This is an inte 4.rnal numbe 4.r (de 4.fault 0000), and is the 4. same 4. as the 4. door numbe 4.r . Unlock time 4.

  • Page 12: Passage 4. Mode 4. Pe 4.Riod

    6 . Example 4. of Comple 4.te 4. Entry: 005#06# . 7 . Ente 4.r anothe 4.r # to indicate 4. the 4. e 4.nd of programming . 8 . In this e 4.xample 4., the 4. lock will re 4.main unlocke 4.d for six hours, starting from the 4. time 4. you activate 4. it in Passage 4. Mode 4. . 9 .

  • Page 13: Proce 4.Dure 4. 7 - Programming The 4. Lock For Ke 4.Ypad

    In this e 4.xample 4., the 4. lock will now re 4.main locke 4.d for 30 se 4.conds afte 4.r thre 4.e 4. wrong Acce 4.ss Code 4.s have 4. be 4.e 4.n e 4.nte 4.re 4.d . No code 4.s, e 4.ve 4.n valid one 4.s or the 4. Maste 4.r Code 4., will work in the 4. lock until that time 4. pe 4.riod has e 4.lapse 4.d . Only the 4. me 4.chanical ove 4.rride 4.

  • Page 14: Use 4.R Le 4.Ve 4.Ls

    USER LEVELS Five 4. diffe 4.re 4.nt classifications of use 4.rs can pe 4.rform various ope 4.rations at the 4. lock . Master User - The 4. Maste 4.r Use 4.r is the 4. top-le 4.ve 4.l manage 4.r who pe 4.rforms the 4. initial lock se 4.tup activitie 4.s and can program all lock functions . The 4.re 4. is a maximum of one 4.

  • Page 15: Proce 4.Dure 4. 1 - Add / Modify A Use 4.R Acce 4.Ss Code 4

    USER ACCESS CODES (PINs) - ExAMPLES Master Code User Code Length Sample User Codes Acceptable Unacceptable 00004992 4 digits 1000 0000 0005 1206 0001 00004992 5 digits 32000 00004 00006 00100 00044 00004992 6 digits 001041 000049 000046 400492 000048 00004992 7 digits 0005521...

  • Page 16: Proce 4.Dure 4. 2 - Add / Modify A Manage 4.R Acce 4.Ss Code 4

    Required User Level: Master, Manager 1 . Put the 4. lock into Pushbutton Programming Mode 4. . 2 . Ente 4.r command 100# to add / modify a Use 4.r Acce 4.ss Code 4. . 3 . Ente 4.r the 4. Use 4.r ID location followe 4.d by # - NNN#, we 4. use 4. 023# for e 4.xample 4.

  • Page 17: Proce 4.Dure 4. 3 - Add / Modify Se 4.Rvice 4. Use 4.R Acce 4.Ss Code 4

    PROCEDURE 3 - ADD / MODIFY SERVICE USER ACCESS CODE A Se 4.rvice 4. Use 4.r is any pe 4.rson who ne 4.e 4.ds acce 4.ss to the 4. lock for a limite 4.d time 4. pe 4.riod in orde 4.r to pe 4.rform a se 4.rvice 4., such as painting or re 4.pairs in the 4. room or are 4.a .
  • Page 18 ® LIMITED WARRANTY Kaba Acce 4.ss Control warrants this product to be 4. fre 4.e 4. from de 4.fe 4.cts in mate 4.rial and workmanship unde 4.r normal use 4. and se 4.rvice 4. for a pe 4.riod of thre 4.e 4. (3) ye 4.ars . Kaba Acce 4.ss Control will re 4.pair or re 4.place 4., at our discre 4.tion, E-Ple 4.x 5x00 and 3x00 Se 4.rie 4.s Locks found by Kaba Acce 4.ss Control analysis to be 4.
  • Page 21 Notes Notes...

  • Page 22: Proce 4.Dure 4. 5 - De 4.Le 4.Te 4. Manage 4.R Acce 4.Ss Code 4.S

    PROCEDURE 5 - DELETE MANAGER ACCESS CODES A Manage 4.r Code 4. should be 4. de 4.le 4.te 4.d from the 4. lock if no longe 4.r ne 4.e 4.de 4.d, in orde 4.r to fre 4.e 4. the 4. code 4. ID location to be 4. assigne 4.d to anothe 4.r Manage 4.r Use 4.r . Manage 4.r Code 4.s that might be 4. ne 4.e 4.de 4.d some 4. time 4. in the 4. future 4. should be 4. de 4.- activate 4.d rathe 4.r than de 4.le 4.te 4.d .

  • Page 23: Proce 4.Dure 4. 8 - Activate 4. Use 4.R Acce 4.Ss Code 4.S

    Required User Level: Master, Manager 1 . Put the 4. lock into Pushbutton Programming Mode 4. . 2 . Ente 4.r Command 299# to de 4.le 4.te 4. all Acce 4.ss and Se 4.rvice 4. Use 4.r Code 4.s . 3 . Ente 4.r anothe 4.r # to indicate 4. the 4. e 4.nd of programming . 4 .

  • Page 24: Proce 4.Dure 4. 10 - Activate 4. Se 4.Rvice 4. Use 4.R Acce 4.Ss Code 4

    PROCEDURE 10 - ACTIVATE SERVICE USER ACCESS CODE A Se 4.rvice 4. Use 4.r Acce 4.ss Code 4. should be 4. activate 4.d if it has be 4.e 4.n de 4.activate 4.d for a ce 4.rtain time 4. pe 4.riod - during a Se 4.rvice 4. Use 4.r’s vacation, for e 4.xample 4. . Required User Level: Master, Manager 1 .

  • Page 25: Proce 4.Dure 4. 13 - De 4.-Activate 4. Use 4.R Acce 4.Ss Code 4.S

    Required User Level: Master, Manager 1 . Put the 4. lock into Pushbutton Programming Mode 4. . 2 . Ente 4.r Command 399# to activate 4. / de 4.-activate 4. Passage 4. Mode 4. . 3 . Ente 4.r the 4. code 4. whe 4.re 4. 1 = activate 4. Passage 4. Mode 4. and 0 = de 4.-activate 4. Passage 4.

  • Page 26: Proce 4.Dure 4. 15 - De 4.-Activate 4. Se 4.Rvice 4. Use 4.R Acce 4.Ss Code 4

    PROCEDURE 15 - DE-ACTIVATE SERVICE USER ACCESS CODES A Se 4.rvice 4. Use 4.r Acce 4.ss Code 4. should be 4. de 4.-activate 4.d for a ce 4.rtain time 4. pe 4.riod - during a Se 4.rvice 4. Use 4.r’s abse 4.nce 4., for e 4.xample 4. . Required User Level: Master, Manager 1 . Put the 4. lock into Pushbutton Programming Mode 4. . 2 .

  • Page 27: Proce 4.Dure 4. 18 - Pe 4.Rform Manual Diagnostics

    9 . Ente 4.r anothe 4.r # to indicate 4. the 4. e 4.nd of programming . 10 . If you still se 4.e 4. the 4. re 4.d LED, the 4. lock has a proble 4.m . Call Kaba’s te 4.chnical (800-849-TECH) support to he 4.lp diagnose 4. and fix the 4. proble 4.m .

  • Page 28: Proce 4.Dure 4. 19 - Swing Bolt Ope 4.Ration

    The following procedure applies to the E-Plex 30xx locks only: PROCEDURE 19 - SWINGBOLT OPERATION This ope 4.ration is similar to the 4. Privacy function of a conve 4.ntional lock with a physical de 4.adbolt, but not quite 4.! In the 4. E-Ple 4.x 3000 Swinbolt ope 4.ration, any valid use 4.r can dise 4.ngage 4., ie 4.
  • Page 29 Warning: Ensure 4. that you re 4.lock the 4. door (e 4.ngage 4. the 4. swingbolt) whe 4.n not ne 4.e 4.de 4.d; othe 4.rwise 4. the 4. lock will stay unlocke 4.d pe 4.rmane 4.ntly compromising se 4.curity . 4 . You can also e 4.ngage 4. the 4. swingbolt using the 4. mechanical override key by pe 4.rforming the 4. following ope 4.ration and the 4. proce 4.dure 4. is almost the 4. same 4. as in Ste 4.p 2 .

  • Page 30: Summary Of Pushbutton Programming Commands

    Summary of Pushbutton Programming Commands Name Command Description of Command Authorization 000 # ‘Modify Maste 4.r Use 4.r Acce 4.ss Code 4. (lock’s Maste 4.r Configure activation)’ (Always 8 digits) MMMMMMMM# MMMMMMMM# 001 # ‘Date 4. se 4.tup’ (MM = 01 to 12; DD = 01 to 31; Maste 4.r YY = 00 to 99) MMDDYY# MMDDYY# 002 #...
  • Page 31 Summary of Pushbutton Programming Commands Name Command Description of Command 100 # ‘Add/Modify Use 4.r Acce 4.ss Code 4.’ NNN Maste 4.r, Mgr Add/Modify = spe 4.cific Use 4.r ID location (001 to 299) Users NNN # (Combination le 4.ngth can be 4. 4 to 8 digits, de 4.pe 4.nding on acce 4.ss le 4.ngth LL se 4.tting) UUUU {UUUU}# UUUU {UUUU}# 101 #...

  • Page 32: Manage 4.R, And M-Unit

    Summary of Pushbutton Programming Commands Name Command Description of Command Authorization 300 # ‘Activate 4. Use 4.r Acce 4.ss Code 4.’ Maste 4.r, Mgr Activate Users NNN# NNN = spe 4.cific Use 4.r ID location (001 to 299) 301 # ‘Activate 4. Manage 4.r Acce 4.ss Code 4.’ Maste 4.r NNN# NNN = spe 4.cific Use 4.r ID location (001 to 299) 302 # ‘Activate 4.

  • Page 33: Visual Fe 4.E 4.Dback Me 4.Ssage 4. De 4.Finitions

    Visual Feedback Message Definitions Condition Parameters Green LED Red LED Duration Rate Valid pushbutton pre 4.sse 4.d 1/10 se 4.c Once 4. Time 4.out e 4.xpire 4.d 1 se 4.c Once 4. Valid acce 4.ss code 4. ke 4.ye 4.d 1 se 4.c Once 4. Acce 4.ss grante 4.d 1/10 se 4.c 1 se 4.c Acce 4.ss grante 4.d 1/10 se 4.c 1 se 4.c (batte 4.ry low condition) Acce 4.ss de 4.nie 4.d 1 se 4.c Once 4.
  • Page 34 User List Table User # Access Code User Name User Type    Optional, Easy-To-Use 4. software 4. calle 4.d “E-Ple 4.x Standard” is also available 4. for this product to program and maintain doors and use 4.rs . For more 4. information, go to www .e-plexlock .com...
  • Page 35 Notes Notes...

  • Page 36: Winston-Sale 4.M, Nc

    Kaba Access & Data Systems Americas 2941 Indiana Ave 4.nue 4. Winston-Sale 4.m, NC 27105 USA Te 4.l: (800) 849-8324 (336) 725-1331 Fax: (800) 346-9640 (336) 725-3269 www .kaba-adsamericas .com PKG3219 0314...

This manual is also suitable for:

E-plex 30 series

Table of Contents