Kaba 5402 Series Technical Manual page 21

Key-In-Knob Cylinders - 5400 Series
5400-xx-1099 uncombinated and use:
FALCON S Series grade 2 knobs, except Hana
4700-80-2004 FS tailpiece, horizontal
3450-80-2003 spacing washer
Original Falcon tailpiece TP-2 or TP-3 with Falcon retainer TPR-1 may be used.
5400-xx-1099 uncombinated and use:
FALCON S Series grade 2, Hana knobs
4700-80-2006 FH tailpiece, horizontal
3450-80-2003 spacing washer
Or, use Falcon tailpiece TP-3 or TP-4
with Falcon retainer TPR-1.
5400-xx-1099 uncombinated and use:
FALCON T Series, grade 1 levers
Most functions use Falcon no. 030730-001-30
T381 inside cylinder only use Falcon no. 030730-003-30
T571 only use Falcon no. 030730-005-30
Falcon parts are not supplied.
5400-xx-1099 uncombinated and use:
FALCON X Series grade 1 knobs, except Hana
4700-80-2003 FX tailpiece, horizontal
3450-80-2003 spacing washer
Or, use Falcon tailpiece TP-1, TP-3,
or TP-5 with Falcon retainer TPR-1.
Falcon parts are not supplied.
5400-xx-1006 uncombinated* and use:
FALCON X Series grade 1, Hana knobs
4700-80-2006 FH tailpiece, horizontal
3450-80-2003 Spacing Washer or, use
Falcon TP-2, TP-4 or TP-6 with retainer
TPR-1
*Note: When ordering cylinder uncombinated, FH tailpiece must be requested.
Note: When replacing 7-pin Falcon cylinder, a 6-pin Falcon cylinder spacer must be used.
Falcon parts are not supplied.
"99" plug & shell
large diameter
FS plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
FH
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
plug requires
J or K series
bottom pins
"99" plug & shell
large diameter
plug requires
FX
J or K series
bottom pins
"06" plug & shell
FH
Section 2 - 10