4339B
To Select Beeper Mode
To change the beeper mode for the comparator result reporting:
1. Press
.
2. Select
using
Beep
3. Select the beep mode using
No beep
OFF
Emits a beep when the comparator result is HIGH, LOW, or the contact
FAIL
check FAILed.
Emits a beep when the comparator result is IN.
PASS
4. Select
using
Exit
To Use Contact Check Function |Monitoring the connection of
test electrodes and DUT
To enable or disable the contact check function:
1. Press
.
2. Select
using
ON/OFF
3. Select
or
using
On
Off
4. Select
using
Exit
5. The Cont Chk annunciator(
When contact check failed, the 4339B displays
contact check function is changable. Refer to
The OPEN correction function must be performed correctly for a valid contact check.
or
and press
or
, and press
or
, and press
or
and press
or
, and press
or
, and press
) turns ON if the contact check function is on.
9
Operation Manual
to select.
to exit to the previous display.
to exit.
to select.
to exit to the previous display.
to exit.
(No-Contact). The limit value for the
N.C.
.
Operating the 4339B
2-13