Agilent Technologies 4339B User Manual page 43

4339B
3. Perform calibration.
a. Press
b. Select
ExecCal
After a while, the calibration is completed with the message \
4. Set the test voltage.
a. Press .
b. Press
5. Perform the OPEN correction.
a. Turn the load knob counterclockwise(ccw) until the upper electrode does not move.
b. Close the cover.
c. Press .
.
using or and press
to set the test voltage to 500 V.
.
Calibration Complete
Measurement Examples
".
3-7