Agilent Technologies 4339B User Manual page 40

h. Press
i. Select
OpenMeas
After a while, the OPEN correction will be completed with the message \
". (If
Complete
|Canceling the stray admittance in parallel with the DUT" in Chapter 2.)
j. Press to turn OFF the test voltage. The V Output indicator will turn OFF.
6. Connect the DUT and close the cover.
7. Press .
8. Select using
R
(Resistance).
R
9. Set the measurement sequence charging time to 1 minute.
a. Press
b. Select using
Chrg
c. Press
d. Select and press
Exit
3-4 Measurement Examples
.
using or
is displayed, see \
Out Of Limit
or and press
.
or and press
.
to exit.
and press .
To Perform OPEN Correction
to select the resistance measurement mode.
.
4339B
Correction