Agilent Technologies 4339B User Manual page 39

4339B
Select
ExecCal
completed with the message \
4. Set the test voltage.
a. Press .
b. Press
5. Perform the OPEN correction.
a. Separate the test electrodes and x them (nothing must be connected to the electrodes).
b. Close the cover.
c. Press .
d. Select using
I
displayed.
e. Press . The Meas Time annunciator(
f. Press to turn ON the test voltage.
The V Output indicator will turn ON.
g. Wait until the
using or and press
Calibration Complete
to set the test voltage to 100 V.
or and press
value has stabilized within 0.5 pA.
I
. After a while, the calibration will be
".
to select the current measurement mode.
) will indicate Long .
9
Measurement Examples 3-3