To Use Comparator Function; Setting The Limit Values; Sorting - Agilent Technologies 4339B User Manual

4339B

To Use Comparator Function

Setting the Limit Values

1. Press
2. Enter the lower limit value using the numeric ENTRY keys, then press
value. You can set the value from 9.900
3. Press .
4. Enter the upper limit value using the numeric ENTRY keys, then press
value and to exit. You can set the value from 9.900

Sorting

To start sorting,
Press . The Comprtr On annunciator(
To turn sorting OFF,
Press again. The Comprtr On annunciator turns OFF.
The sorting results are HIGH, IN, and LOW.
Where,
HIGH greater than higher limit
IN between higher limit and lower limit
LOW less than lower limit
The 4339B shows the comparison results using the display, beeper, printer, and
16064B LED Display/Trigger Box. (To use the 16064B, see \Accessories Available" later in this
chapter.)
For result output to the display, see \To Select Display Mode" in the next page.
For result output to the beeper, see \To Select Beeper Mode" in the next page.
For result output to the printer, see \To Print Measurement Data" later in this chapter.
2 2
10 to 9.900 10 .
37 37
2
10 to 9.900
37
) turns ON.
9
to enter the
to enter the
2
10 .
37
Operating the 4339B 2-11