4339B
To Print Measurement Data
Setting the Printer
1. Use an GPIB compatible printer, set to the listen-always mode.
2. Connect the printer to the 4339B's GPIB port on the rear panel.
3. Turn the printer ON.
Printing
Set the 4339B to talk only mode (Set the 4339B's GPIB address to 31).
1. Press
.
2. Press
. The Talk Only annunciator(
) turns ON, and the printer begins printing the
9
measurement data.
Figure 2-1. Printer Output
Disabling Printing
Change the GPIB address to an address other than 31 (for example, 17, which is the default
setting).
Press
.
2-14
Operating the 4339B