Agilent Technologies 4339B User Manual page 44

d. Select using
I
e. Press . The Meas Time annunciator(
indicates Long .
f. Press . The V Output indicator will turn ON.
g. Wait until the
I
h. Press
i. Select
OpenMeas
After a while, the OPEN correction is completed with the message \
". (If
Complete
|Canceling the stray admittance in parallel with the DUT" in Chapter 2.)
j. Press . The V Output indicator will turn OFF.
6. Set the DUT.
a. Place the DUT on the Main electrode.
b. Turn the load knob and stick the electrode on the DUT.(Let the load scale indicate more
than 0 kg and less than 10 kg.)
c. Close the cover.
7. Set the measurement parameter to Rv(
a. Turn the Volume/Surface selector of the 16008B to \Volume".
b. Press .
c. Select using
Rv
3-8 Measurement Examples
or and press
value has stabilized within 0.5 pA.
.
using or
is displayed, see \
Out Of Limit

or and press
to select the current measurement mode.
) will
9
and press .
To Perform OPEN Correction
v : volume resistivity).
.
4339B
Correction