Test Data Sheet; Removal And Assembly; Installation Planning; Rack Information - Comtech EF Data Radyne RCS20 Installation And Operation Manual

M:n redundancy switch
Hide thumbs Also See for Radyne RCS20:
Table of Contents

Advertisement

RCS20 M:N Redundancy Switch
Installation
M:N Switch to Modem Cable(s) for Backup Modulator and Demodulator
Test I/O Mating Connector
Optional 1:N Switch to Modem, I/O and Coaxial Cables for Modems 1 – 9
Optional Modem bypass cable(s) for Modems 1 – 9

2.2.1 Test Data Sheet

Each RCS20 M:N Redundancy Switch system is shipped with a Test Data Sheet. This report contains
information on the results of the Switch quality control testing. The report also includes information
pertaining to the system settings that were made at the factory. It is recommended that the customer/user
save this report for future reference.
2.3

Removal and Assembly

Carefully unpack the unit and ensure that all of the above items are in the carton. If the available AC
mains power at the installation site requires a different cordset from those included in the package, then a
suitable and approved cordset (for the country where the equipment is to be installed) will be required
before proceeding with the installation.
Should the Power Cable/AC Connector be of the wrong type for the installation, either the cable or the
power connector end should be replaced. The power supply itself is designed for universal AC
application. See specifications for appropriate voltages and currents.
2.4

Installation Planning

Adequate site planning and preparation simplifies the installation process and results in a more reliable
system.

2.4.1 Rack Information

The RCS20 is designed so that it can be installed in a standard 19-inch rack. The RCS20 is 5¼", 3 Rack
Units (3RU) high and must be installed on the front of a rack with the front panel facing forward
The DDS20 is 8¾" (5RU) high and is preferably installed at the top of a rack unit with the Terrestrial
Interface connectors available at the top of the rack and the modem connections available at the at the
bottom of the DDU20 in the interior of the rack. The DDS20 may also be installed at the rear of a rack
with the Terrestrial Interface connectors available at the rear of the rack and the modem connections
available in the interior of the rack.
NOTE
Cables ordered in addition to those listed may arrive separately.
2–2
Revision 15
MN-RCS20 and CD-RCS20

Advertisement

Table of Contents
loading

Table of Contents