Dual G.703 E3/T3/Sts-1 75Ω Data Interface (Cdi-10) Kit Kt/12582 And Hssi Data Interface (Cdi-60) Kit Kt/12586 - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch accessory product for use only with comtech ef data cdm-625/a, cdm-840, cdm-750, cdm-760, cdm-570l, cdm-700, cdm-710, cdm-710g, cdm-600l (clm-9600l), and sdm-300l3 modems
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (176 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
4.6.2.1
Dual G.703 E3/T3/STS-1 75Ω Data Interface (CDI-10) Kit KT/12582
and HSSI Data Interface (CDI-60) Kit KT/12586
Figure 4-34 shows an example of a CDM-700 1:1 modem configuration with the CDI-10 Dual
G.703 Data Interface installed in Slot 1, and the CDI-60 HSSI Data Interface installed in Slot 2.
The figure depicts installation of one KT/12582 Dual G.703 Interface Kit (each kit can supply one
or two CDI-10 interfaces), and one KT/12586 HSSI Interface Kit.
CEFD Part No.
CA/BNC75OHM
RF/SA32KC-IN/OUT
CEFD Part No.
PP/SC3523
Figure 4-34. CDM-700 G.703 E3/T3/STS-1 / HSSI 1:1 Example
KT/12582 G.703 (CDI-10) 75Ω Interface Kit
Qty
Description
8
Cable – IF BNC, 75Ω, 1'
4
Combiner – 2-way w/Bracket, 0.25-300 MHz, 75Ω BNC
KT/12586 HSSI (CDI-60) Interface Kit
Qty
Description
1
Cable - RoHS-Compliant, HSSI 'Y' Splitter, (2X) HD-50M HD-50F, 3"
4–40
Revision 10
MN/CRS170A.IOM
To/From User
To User
From User
Advertisement
Table of Contents
