Table of Contents
Advertisement
RCS20 M:N Redundancy Switch
Revision 15
Electrical Interfaces
MN-RCS20 and CD-RCS20
Chapter 5. Electrical Interfaces
5.1
Overview
This chapter describes the interfaces available on the RCS20 M:N Redundancy Switch System (Figure
5-1). All RCS20 connections (including the RCU20 and various configurations of the DDS20 and IFS20)
are made to labeled connectors located on the back panel of the RCU (Figure 5-2). Any connection
interfacing to the RCS20 must use an appropriate mating connector.
Figure 5-1 Complete System Interconnection and Cabling Information for System Configuration
5–1
Advertisement
Table of Contents
