Comtech EF Data Radyne RCS20 Installation And Operation Manual page 66

RCS20 M:N Redundancy Switch
User Interfaces
4.3.2.5 REMOTE PORT CONFIGURATION
This screen displays the Remote Port Baud Rate, the Remote Port Address, and the Terminal Emulation
Type, and allows the user to cycle to Subscreens to change the configurations. The baud rate may be
any of the following:
115200 57600
The Remote Port Address may be a value from 32 to 255, and is entered from the keypad. The Remote
Port Protocol may be one of the following:
RLLP
•
2400
•
1. Press <BAUD> to cycle to the REMOTE PORT BAUD RATE CONFIGURATION Subscreen to
change the baud rate.
2. Press <ADDR> to cycle to the REMOTE PORT ADDRESS Subscreen to change the address.
3. Press <PROTOCOL> to cycle to the REMOTE PORT PROTOCOL CONFIGURATION
Subscreen to change the protocol type.
4. Press <CLR> to abort programming (no switch parameters changed).
Key Label
S1 BAUD
S2 ADDR
S3 PROTOCOL
S4 NEXT
Numeric Keypad ---
REMOTE PORT CONFIGURATION
RCU20 REMOTE PORT BAUD RATE : 1200
RCU20 REMOTE PORT ADDRESS
RCU20 REMOTE PORT PROTOCOL
BAUD ADDR PROTOCOL
38400 19200
Press to cycle to the REMOTE PORT BAUD RATE CONFIGURATION
Subscreen.
Press to cycle to the REMOTE PORT ADDRESS Subscreen.
Press to cycle to the REMOTE PORT PROTOCOL CONFIGURATION Subscreen.
Press to cycle to the next screen.
Press <CLR> to abort programming (no switch parameters changed).
4–34
: 32
: RLLP
NEXT
9600 4800
Function
Revision 15
MN-RCS20 and CD-RCS20
2400 1200