Table of Contents
Advertisement
RCS20 M:N Redundancy Switch
Remote Operations
A.3.15
Opcode <2218h> Copy Modem Configuration
<1>
From Modem
<1>
To Modem
The 'From' and 'To' modems must be present in the chassis and not equal to each other. You
can not copy a modem's configuration onto itself. The Mod configuration will be copied and if
successful, the Demod configuration will be copied. If any errors occur, appropriate error
Opcodes will be returned.
A.3.16
Opcode <2219h>* Backup Test Modem Configuration
<1>
Modem Number
A.3.17
Opcode <221Ah>* Backup Test All Modem's Configurations
There is no data field for this command.
In order to backup test a modem configuration, a modem must be a prime modem that has
been assigned a backup. The prime modem's configuration must be learned and its assigned
backup present in the chassis.
A.3.18
Opcode <2403h> Query RCS20 Device Identification
<1>
Device Identification
Command Data Field (2 bytes)
0 = Modem 0, 1 = Modem 1, 2 = Modem 2, 3 = Modem 3, 4 = Modem 4,
5 = Modem 5, 6 = Modem 6, 7 = Modem 7, 8 = Modem 8, 9 = Modem 9.
must be
Modem configuration
0 = Backup 1, 1 = Modem 1, 2 = Modem 2, 3 = Modem 3, 4 = Modem 4,
5 = Modem 5, 6 = Modem 6, 7 = Modem 7, 8 = Modem 8, 9 = Modem 9,
10 = All Modems
Command Data Field (1 byte)
1 to 8 if channel 9 is configured as backup
1 to 9 if channel 9 is not configured as backup
Query Response Data Field (1 Byte)
24 decimal for RCS20
A–33
MN-RCS20 and CD-RCS20
learned.
Revision 15
Advertisement
Table of Contents
