Comtech EF Data Radyne RCS20 Installation And Operation Manual page 65

RCS20 M:N Redundancy Switch
User Interfaces
4.3.2.4 TERMINAL PORT EMULATION
This subscreen allows the user to modify the RCS20 terminal port terminal emulation.
4.3.2.4.1 Programming steps:
1. Press <ADDS VP>, <VT 100>, or <WYSE 50> to select the desired terminal port emulation type.
The switch parameter table will be updated immediately.
2. Press <CLR> or <NEXT> to abort programming (no switch parameters changed).
Key Label
S1 ADDS VP
S2 VT 100
S3 WYSE 50
S4 RETURN
Numeric Keypad ---
TERMINAL PORT EMULATION
TERMINAL EMULATING:
ADDS VP VT100 WYSESO
Selects ADDS VP as Term Emulation
Selects VT100 as Term Emulation.
Selects WYSESO as Term Emulation.
Press to cycle back to the TERMINAL PORT CONFIGURATION Screen
Press <CLR> to abort programming.
4–33
VT100
RETURN
Function
Revision 15
MN-RCS20 and CD-RCS20