Comtech EF Data Radyne RCS20 Installation And Operation Manual page 64

RCS20 M:N Redundancy Switch
User Interfaces
Key
S3
S4
Numeric Keypad
4.3.2.3 TERMINAL PORT BAUD RATE
This subscreen allows the user to modify the RCS20 terminal port baud rate.
4.3.2.3.1 Programming steps:
1. Press <19200>, <9600>, or <2400> to select the desired terminal port baud rate. The switch
parameter table will be updated immediately.
2. Press <CLR> or <NEXT> to abort programming.
IMPORTANT
After changing the Terminal Port Baud Rate, power must be cycled before the baud
rate change takes effect.
Key Label
S1 19200
S2 9600
S3 2400
S4 CANCEL
Numeric Keypad ---
Label
--- N/A
NEXT Press to cycle to the next screen.
--- N/A
TERMINAL PORT BAUD RATE
BAUD RATE:
19200 9600
Press to select 19200 bps.
Press to select 9600 bps.
Press to select 2400 bps.
Press to cycle back to the TERMINAL PORT CONFIGURATION Screen
Press <CLR> or <NEXT> to abort programming (no switch parameters changed).
4–32
Function
19200
2400 CANCEL
Function
Revision 15
MN-RCS20 and CD-RCS20