Table of Contents
Advertisement
DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Creating LTE WAN Connection
!
For the USB modem Megafon M100-1, please reboot the gateway after creating the WAN
connection.
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating an LTE WAN connection, go to the
the page displayed (see the USB Modem section, page 126). Then on the connection creation page,
go to the All Settings tab, select the relevant value from the Connection type drop-down list,
and specify the needed values.
Figure 59. The page for creating a new LTE connection. Selecting a connection type.
Parameter
Enable connection
Connection name
* For correct operation of USB modems you may need to update the gateway's firmware.
11 For some models of LTE USB modems it is required to disable the PIN code check on the SIM card prior to
connecting the USB modem to the gateway.
*
USB Modem / PIN
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 78 of 217
Configuring via Web-based Interface
page and enter the PIN code
Description
11
on
Advertisement
Table of Contents
