D-Link DPN-144DG User Manual page 169

Gpon ont dual band wireless ac1200 voip gateway with 1 gpon port, 4 10/100/1000base-t ports, 2 fxs ports, and 1 usb port
Hide thumbs Also See for DPN-144DG:
Table of Contents

Advertisement

DPN-144DG GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Parameter
Call waiting
Anonymous call
blocking
Anonymous calling
DND
Enable pound key
Forwarding
Call forwarding number
The forwarding delay
Flash time / Flash time
minimum
Advanced
Move the switch to the right to accept incoming calls when the line
is busy. To switch between calls, press the FLASH key on the
phone.
Move the switch to the right to reject calls when the calling party
conceals its number.
Move the switch to the right to conceal your number from the called
party.
Do Not Disturb. Move the switch to the right to reject all incoming
calls (the busy tone will be heard).
Move the switch to the right to speed up dialing with pressing # (the
pound key) immediately after dialing numbers.
Forwarding
From the drop-down list, select a forwarding mode for the current
line. Leave the Off value if forwarding is not needed.
A number to which the gateway redirects calls in accordance with
the mode selected from the Forwarding list.
A time period (in seconds) after which the gateway redirects calls to
the number specified in the Call forwarding number field. The
field is available for editing if the If no answer value is selected
from the Forwarding list.
Flash Settings
The maximum and minimum value for flash time (the user hangs up
the receiver and lifts it again) which the gateway will regard as
pressing the FLASH key.
Page 169 of 217
Configuring via Web-based Interface
Description

Advertisement

Table of Contents
loading

Table of Contents